1967 Cortina GT Build

Quote
Drew
so yer thinking a standerd 8 inch toyoda from either a 4 runner or tacomam
pick and pull?

If you go that route take the time to strip EVERYTHING you can off. Take tin snips, whatever strip it down..
Maybe private sales on Craigslist

Lookie this in 2 seconds:
http://seattle.craigslist.org/skc/pts/4529971200.html


Toyota pickup parts
$100 Complete 4cyl 8" diff with 3.90 gears $40 4cyl 8" diff with no ring gear, no carrier and bad 5.29 pinion gear
$40 open 8" carrier
$75 8" carrier v6 style
$100 4.10 gears reverse cut gears for 8" high pinion diff

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

guess my search words were to narrow to catch that holy shit $100 that's awesome

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

THANKS JOHN

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

took a look at what the dude had and he didn't have the axles and housing just a diff cartridge with gears, been pokeing around and found a complete rear for 600 out of a 2007 Tacoma didn't say if it was a 8 inch

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

Quote
Drew
took a look at what the dude had and he didn't have the axles and housing just a diff cartridge with gears, been pokeing around and found a complete rear for 600 out of a 2007 Tacoma didn't say if it was a 8 inch

Waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaay too much..
Pick-n-pull is around $100

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

looks like I'll be hunting for the 8 inch rearend this weekend

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

Scored a 2005 coma rear axle 8 inch came with 60k miles on it, not a bad saturday!!!

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

trany gear rats 1st 3.82
2nd 2.26
3rd 1.64
4th 1.18
5th 1.00
6th 0.79
r 3.60

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

Quote
Drew
trany gear rats 1st 3.82
2nd 2.26
3rd 1.64
4th 1.18
5th 1.00
6th 0.79
r 3.60

See what I was saying? Skip 1st and use derp! derp! derp! thru 6th

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.



Edited 1 time(s). Last edit at 07/23/2014 01:59PM by john vanlandingham.

Jvab really meant to say 2nd thru 6th

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

kinda stumped with a 23.4 dia. tire final drive ratio 5.3 and 6th gear at .79 this would give 150@9000 on the button?

---

Ask, listen-read, research, learn, weigh, execute, then let er rip



Edited 1 time(s). Last edit at 07/23/2014 11:10PM by Drew.

Love laborday weekend time to get so personal shit done.
Getting ready for JVAB MAGIC!

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

Another few hours of work time it will be all clean

---

Ask, listen-read, research, learn, weigh, execute, then let er rip

Quote
Drew
Another few hours of work time it will be all clean

Remember I have the weld on link mounts and shock brackets. Clean that thang up!

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

have to finish grinding then smooth out followed by the almighty sand blaster

---

Ask, listen-read, research, learn, weigh, execute, then let er rip