<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/">
    <channel>
        <title>RSF2000 Rally Sport Focus! RWD Revolution</title>
        <description>RWD Focus:

Why;
1       They are very plentiful there are over 2,000,000 in the us alone!
From 2000 to now they have not changed suspension framing, With a few minor 
changes like in 05 they moved to ears for there front brakes. 2000 to 2004 are 
showing up in our local inexpensive junk yards, where spare rack and pinions and 
components are cheap and in huge numbers.

2       The cars are only falling more in price I have seen running 2000 focus's for 
under 1000 and almost free if they have motor issues. Also now on CL there is two 2005 
with 2.0 duratecs for 3500 obo.

3       The Duratec! a very  versatile and good power plant that picking up a huge after market 
fallowing thanks to open wheel and custom swaps in the UK and states.
The ford harness is flashable and easy to adapt and swap. In the states any mazda 
turbo 2.3 steel crank will fit the 2.3, and they go for $300.

4       The swap parts are easy to find, such as ford explorer rear diff and t5 
transmission. The explorer diff has a limited slip factory but can be upgraded with 
a carbon Kevlar clutch pack and forged housing for under $300 and can
have custom preload for little extra, along with about any gear choice needed for street or rally.

5       The front and rear frame will have to be replaced and thats what I will be building 
and selling The goal for the frame's cost will be $1200 for front and rear frame. There are 
quite a bit more parts that it will require but this to get to a point where the focus can be 
the best RWD for the buck.

6       Cost. I want to set people up with the options to have a rwd car that with have a near 
perfect formula, Close ratio gear box good limited slip and with plenty of power NA or turbo.
If the budget is tight there are several stock ford transmissions like ranger or miata 6 speed. 
and stock gear ratios and limited slips are not that far off from pretty damn good. 

7       Repairs and spares. With the cost of diffs and t5s and duratecs people can afford 
to have spares. Going home with blown motors or a dead box's would be a thing of the past 
for the entry level racer. 

8       Other cars This swap kit will not be just for focus it will cross in too the mazda 3, 
volvo s40 60 80 and c30. It will also work with for the UK focus market.



The build 
I am using the ford explorer rear IRS from 2002 to present, there spline count is 31 and 29 outer.
They are rather large but made of aluminum and can withstand huge hp numbers. I will retain the 
stock explorer cv and outer flange and bearing, the cv is overkill but cheap and plentiful.

The diff will be mounted with similar geometry as the stock focus, the was the diff is made allows 
for mounts that will make the diff pull out from the bottom making changing them in to 8 bolts, 
4 for the drive line and 4 for the diff on a 06 plus and 3 for a 2002 to 05.

I will be making a fabricated rear knuckle and use the focus trailing mount its tucked up and in
which is great for protection. The knuckle with be shaped with a void at the bottom so 
when you unbolt the hub you can pull the hub brake and cv at once. With this you can change a 
cv in 3 or 4 minutes.

The back of the car has quite a bit of room but will require a small tower to be installed for 
a coil over shock, My goal is 12&quot; of travel with the set up. The rest will be bolt on.

in the front I will retain the stock power steering and build a new direct bolt on frame 
and move the rack forward and bolt in from the bottom. with this there will be the 
second peace of fabricating, of installing a small preformed tranny tunnel that 
would be best welded in.

motor mount will have to be fabricated but should require little to no welding on the car, due to 
the existing mounts on the passengers side and fabricated ones on the drivers side.

front suspension will not be changed unless wanted I do plan on making long travel 
parts, with fabricated arms but this would be icing on the cake.

The bolt pattern will be changed to 5 on 4.5 and the mazda 3 knuckles already have this 
in the front and swap over. for brakes I will make a large brake kit but again thats more 
parts that are outside of the RWD swap. 




Thanks for reading This is what I hope to make my niche for years to come.</description>
        <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,45563#msg-45563</link>
        <lastBuildDate>Wed, 13 May 2026 13:32:20 -0500</lastBuildDate>
        <generator>Phorum 5.2.15a</generator>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97588#msg-97588</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97588#msg-97588</link>
            <description><![CDATA[ <a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0445_zps863aba33.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0445_zps863aba33.jpg" class="bbcode" border="0" /></a><br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0444_zpsa5201ebb.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0444_zpsa5201ebb.jpg" class="bbcode" border="0" /></a>]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Wed, 28 May 2014 13:01:55 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97460#msg-97460</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97460#msg-97460</link>
            <description><![CDATA[ Ya totaly so i jigged the top mounts to be identical to the front and see if i can get the strut in there with out cutting up the struture part. We will see it will be intresting to see how much toe <br />
in it dose.]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Tue, 20 May 2014 19:05:14 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97440#msg-97440</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97440#msg-97440</link>
            <description><![CDATA[ The geometry may work out fine.  You've got enough of it built there you can move it through the travel and take measurements and see what it does.  You need to rig up the upper mount (ie: strut top) to get a proper reading though.]]></description>
            <dc:creator>Doivi Clarkinen</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Tue, 20 May 2014 02:42:38 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97437#msg-97437</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97437#msg-97437</link>
            <description><![CDATA[ Could you mount it on the bottom of the knuckle to gain more room?  I'm not sure toe in is a bad thing tho ..it sure helped the old 510s.]]></description>
            <dc:creator>heymagic</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Mon, 19 May 2014 20:43:21 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97436#msg-97436</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97436#msg-97436</link>
            <description><![CDATA[ <blockquote class="bbcode"><div><small>Quote<br/></small><strong>Doivi Clarkinen</strong><br/>
<blockquote class="bbcode"><div><small>Quote<br/></small><strong>SteelSolutions</strong><br/>
we will see its two times stock lenth over new subaru and stock focus. <br />
<br />
I am thinking the same thing but might be running in to the body because the arm is higher up<br />
The bump steer is toe in its not near as crucal if you get tow out you spin instantly. easy fix <br />
down the road im happy to see a frame that fits and has a final mounting point that will work.</div></blockquote>
<br />
The problem is the toe link is shorter than the lower control arm.</div></blockquote>
<br />
Um ya?? i dont get what your getting at? many many many cars run a shorter link on toe in the <br />
front there is something it helps on a shit box road car. The affect of this, say guys running <br />
08+ subarus is about 2 times less of that toe in on comp and droop. My concern of 4 more<br />
 inches is so little it can be done but unessiary at the moment. Like I said the reasoning is to<br />
 keep it in line with the mount on the knuckle, it needs to be higher in the car and if its longer it<br />
 will mean I have to cut out and channel part of the suport rail of the car gotta compremise for <br />
now.<br />
<br />
Hope that makes sence my garbage run on sentences and shit grammer I have a hard time <br />
getting accross what I mean or people mistake what I say as if im not in understanding.]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Mon, 19 May 2014 18:45:33 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97410#msg-97410</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97410#msg-97410</link>
            <description><![CDATA[ <blockquote class="bbcode"><div><small>Quote<br/></small><strong>SteelSolutions</strong><br/>
we will see its two times stock lenth over new subaru and stock focus. <br />
<br />
I am thinking the same thing but might be running in to the body because the arm is higher up<br />
The bump steer is toe in its not near as crucal if you get tow out you spin instantly. easy fix <br />
down the road im happy to see a frame that fits and has a final mounting point that will work.</div></blockquote>
<br />
The problem is the toe link is shorter than the lower control arm.]]></description>
            <dc:creator>Doivi Clarkinen</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Sun, 18 May 2014 03:59:14 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97401#msg-97401</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97401#msg-97401</link>
            <description><![CDATA[ we will see its two times stock lenth over new subaru and stock focus. <br />
<br />
I am thinking the same thing but might be running in to the body because the arm is higher up<br />
The bump steer is toe in its not near as crucal if you get tow out you spin instantly. easy fix <br />
down the road im happy to see a frame that fits and has a final mounting point that will work.]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Sat, 17 May 2014 18:03:19 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97386#msg-97386</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97386#msg-97386</link>
            <description><![CDATA[ I think the toe arms need to be longer, I would imagine less bump steer in the rear would be good.]]></description>
            <dc:creator>phlat65</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Fri, 16 May 2014 20:19:26 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97364#msg-97364</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97364#msg-97364</link>
            <description><![CDATA[ lord knows if i was done with school, i would fund one of these.  Cause damn it, you just don't get workmanship like that anymore]]></description>
            <dc:creator>mellow65</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 18:15:15 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97361#msg-97361</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97361#msg-97361</link>
            <description><![CDATA[ <a href="http://s284.photobucket.com/user/SteelSolutions/media/9bc5d546-26d6-49eb-9068-fa3bcf432b38_zps3b3c38c6.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/9bc5d546-26d6-49eb-9068-fa3bcf432b38_zps3b3c38c6.jpg" class="bbcode" border="0" /></a><br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0435_zps47c083d4.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0435_zps47c083d4.jpg" class="bbcode" border="0" /></a><br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0432_zpsda5d46aa.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0432_zpsda5d46aa.jpg" class="bbcode" border="0" /></a>]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 17:40:32 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97359#msg-97359</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97359#msg-97359</link>
            <description><![CDATA[ Have wallet will work? <br />
over the years i havent put one on a road yet but my ideas have gotten better simpler <br />
and easyer to make i mad that rear frame in 5 hrs. i have proven all the other parts im<br />
making already in what i have built for subaru arms and other cars i just need some one <br />
willing to pay for a car the budget of 3000 dosint cut it like alot of the people i have talked <br />
too that really like the idea on facebook its not a cheep idea but with a good amount of cash <br />
the speck of the car should be quite abit higher than the R2 fiesta i would say it would take about <br />
20k and tons of hand work to get that spec but hell people pay that for the subie they start with!]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 16:58:47 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97358#msg-97358</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97358#msg-97358</link>
            <description><![CDATA[ Speaking as an engineer in the middle of doing at least one car more or less from scratch (Locost, albeit one with mutations, like anything else done by engineers) the appeal of this thing to me is that even if there's cutting and welding and crap, in theory it's all figured out already.  Cutting metal's easy enough, figuring out where to cut it's harder.<br />
<br />
I want one.]]></description>
            <dc:creator>mekilljoydammit</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 15:57:58 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97357#msg-97357</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97357#msg-97357</link>
            <description><![CDATA[ my tag is Setteling down fuck that never growing up. Mod can i get that fixed you Tired party animal.]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 15:43:45 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97356#msg-97356</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97356#msg-97356</link>
            <description><![CDATA[ right who knows whats gonna happen i love the car if you sit in one and drove it you <br />
get a vibe of controle not from the car your up high you have little overhang and <br />
you have a really tall roof for giants. There are over 2 million focus running around <br />
i see the shells for 400 bucks and what not. I think the idea of the car now would be buy <br />
and car tear it down to nothing do a motor with a stand alone and do a hotrod wiring harness <br />
fuck everything in the car and weld a tunnel and weld two towers in and cut the wheel well <br />
out and fuel cell. I would love to just sell the rolling chassis im not a wire guy a fuel guy <br />
or a motor guy i would love to just build and sell a bare rolling shell with a full set of spares.]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 15:42:12 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97354#msg-97354</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97354#msg-97354</link>
            <description><![CDATA[ And think his goal was to make it as bolt on as possible.  And clearly I'm using the phrase &quot;bolt on&quot;, very loosely.  Some metal work required.]]></description>
            <dc:creator>mellow65</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 10:36:46 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97347#msg-97347</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97347#msg-97347</link>
            <description><![CDATA[ As produced, they are. The whole idea is to be able to convert them.]]></description>
            <dc:creator>mekilljoydammit</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 07:36:21 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97341#msg-97341</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97341#msg-97341</link>
            <description><![CDATA[ Sorry, I know you're well in to this build, but this is my first time seeing it.<br />
<br />
The first post has me confused:<br />
<br />
<blockquote class="bbcode"><div><small>Quote<br/></small><strong></strong><br/>
RWD Focus: <br />
<br />
Why; <br />
1 They are very plentiful there are over 2,000,000 in the us alone! </div></blockquote>
<br />
There are 2 million RWD Ford Focus in the US? Really?<br />
<br />
I thought they were all FWD?]]></description>
            <dc:creator>ofensus</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 15 May 2014 00:49:36 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97340#msg-97340</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97340#msg-97340</link>
            <description><![CDATA[ <blockquote class="bbcode"><div><small>Quote<br/></small><strong>SteelSolutions</strong><br/>
you mean this? <br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0427_zps5bc2bc4a.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0427_zps5bc2bc4a.jpg" class="bbcode" border="0" /></a><br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0426_zpsd945bdc2.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0426_zpsd945bdc2.jpg" class="bbcode" border="0" /></a></div></blockquote>
<br />
Looking good!]]></description>
            <dc:creator>RALLYRS</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Wed, 14 May 2014 23:04:50 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97326#msg-97326</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97326#msg-97326</link>
            <description><![CDATA[ you mean this? <br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0427_zps5bc2bc4a.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0427_zps5bc2bc4a.jpg" class="bbcode" border="0" /></a><br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0426_zpsd945bdc2.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0426_zpsd945bdc2.jpg" class="bbcode" border="0" /></a>]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Wed, 14 May 2014 15:02:44 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97216#msg-97216</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97216#msg-97216</link>
            <description><![CDATA[ Nice William!<br />
<br />
Anxious to see how the rest of the rear suspension/drivetrain goes together...]]></description>
            <dc:creator>RALLYRS</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Sun, 11 May 2014 16:44:27 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,97146#msg-97146</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,97146#msg-97146</link>
            <description><![CDATA[ jigged fornt towers in the rear will weld them in this weekend.<br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0411_zpsa927d8ac.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0411_zpsa927d8ac.jpg" class="bbcode" border="0" /></a><br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0412_zpsedcf2554.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0412_zpsedcf2554.jpg" class="bbcode" border="0" /></a><br />
<a href="http://s284.photobucket.com/user/SteelSolutions/media/IMAG0413_zpsc1f7f7a6.jpg.html" target="_blank" rel="nofollow" ><img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/IMAG0413_zpsc1f7f7a6.jpg" class="bbcode" border="0" /></a>]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 08 May 2014 18:04:06 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,87417#msg-87417</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,87417#msg-87417</link>
            <description><![CDATA[ Time for my annual bump-ok well maybe a bit sooner!<br />
<br />
Hope all is well-William!<br />
<br />
<br />
Any more news/pics?<br />
<br />
<br />
TSSFAB's facebook link for this project:<br />
<br />
<a href="https://www.facebook.com/RSF2000" target="_blank" rel="nofollow" >https://www.facebook.com/RSF2000</a><br />
<br />
<br />
<br />
Oh and William-plenty of interest in this still-17 pages on Focaljet.com and 5 pages on<br />
Focusfanatics.com!<br />
<br />
<br />
If you get a second maybe you could throw a quick post to the guys at these sites to let them know you're alive. :)<br />
<br />
Here's the Focaljet link:<br />
<br />
<a href="http://forums.focaljet.com/team-pit-stop/643612-who-wants-rwd-irs-focus.html" target="_blank" rel="nofollow" >http://forums.focaljet.com/team-pit-stop/643612-who-wants-rwd-irs-focus.html</a><br />
<br />
<br />
And the Focusfanatics link:<br />
<br />
<a href="http://www.focusfanatics.com/forum/showthread.php?t=280062" target="_blank" rel="nofollow" >http://www.focusfanatics.com/forum/showthread.php?t=280062</a><br />
<br />
<br />
I love me some 240,xr and now BMW,but lets get another inexpensive RWD option out there!<br />
<br />
Thanks and good luck!]]></description>
            <dc:creator>RALLYRS</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Sun, 18 Aug 2013 12:23:30 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,84292#msg-84292</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,84292#msg-84292</link>
            <description><![CDATA[ <img src="http://sphotos-a.xx.fbcdn.net/hphotos-frc3/980895_426076177490155_610954206_o.jpg" class="bbcode" border="0" /><br />
<br />
the fronts are not identical in length just style and hardware.<br />
The rear arm will be sandrail huge and the upper mount you see is for <br />
the steer link mount.  <br />
<br />
ya I'm still going to use the exploder diff I can get gears for under 100<br />
and a custom lsd carbon clutch plate diff for under 300. To be honest a <br />
r200 off a skyline on ebay for 300 would be a better bet or supra but <br />
keeping it in the family is cool to haha.<br />
<br />
its not dead i have made some stuff that i haven't posted.]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 06 Jun 2013 15:39:57 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,84248#msg-84248</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,84248#msg-84248</link>
            <description><![CDATA[ <blockquote class="bbcode"><div><small>Quote<br/></small><strong>SteelSolutions</strong><br/>
I'm leaning against it as im typing i have a new rack and new knuckles and the <br />
plan now is to mirror the front towers in the back and use the same shock, knuckle <br />
,and arms front and rear. It should prove to be easier than all my original ideas.<br />
Keep It Simple Stupid.....</div></blockquote>
<br />
Sounds interesting..redundancy with the suspension parts is nice..and rear steer FTW!<br />
<br />
Just kidding...Obviously you'll &quot;lock&quot; the knuckles somehow.<br />
<br />
Will you get the travel you're after with the front arms in the back?<br />
<br />
Still using explorer diff or something else?]]></description>
            <dc:creator>RALLYRS</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Wed, 05 Jun 2013 10:41:41 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,84163#msg-84163</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,84163#msg-84163</link>
            <description><![CDATA[ I'm leaning against it as im typing i have a new rack and new knuckles and the <br />
plan now is to mirror the front towers in the back and use the same shock, knuckle <br />
,and arms front and rear. It should prove to be easier than all my original ideas.<br />
Keep It Simple Stupid, it would be this or solid axle im not against them but the <br />
oooo ahhh factor gos little further with the IRS.<br />
<br />
Thanks for bring it up its not dead its slow and no funds or time. I would love if<br />
some one wanted to jump in and split the toyness fun another set of hands that<br />
loves ford and building fun stuff and has little money. One man show dose not work<br />
well so we will see I need to get my wagon in too and get its 18 inch lift kit for the <br />
Bajabaru project<br />
<br />
oo i did get a fiberglass hood a friend made for me but he said i cant touch it till the <br />
car is moving, they say the Billtnami will wreck it.]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Mon, 03 Jun 2013 15:52:51 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,84139#msg-84139</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,84139#msg-84139</link>
            <description><![CDATA[ Hey..remember this awesome thread-guys?<br />
<br />
Hope this hasn't fizzled...looking at Williams links ..looks like he's busy with Subie stuff..I want to add a &quot;groan&quot; here-but understand $$ is $$..gotta do what you need to get moneys..and many of those guys got loads of it...<br />
<br />
No offense to the Subie/Evo crowd but personally I have little interest in the $$ AWD stuff...<br />
<br />
<br />
2wd is where it's at!<br />
<br />
<br />
Grassroots and like William said-there are Metric SHIT Tons of these in boneyards-go drive down the street for 5 minutes-you'll only pass about 12 of them...<br />
<br />
Here's a reminder of his RWD Focus Facebook link-maybe we can pester him some more :)<br />
<br />
 <br />
<br />
<a href="https://www.facebook.com/RSF2000" target="_blank" rel="nofollow" >https://www.facebook.com/RSF2000</a><br />
<br />
<br />
Hope you are healthy and all is well William!<br />
<br />
<br />
<br />
And remember everyone..<br />
<br />
Go Ford!<br />
<br />
(North) 'Merica! Fuck Yeah!<br />
<br />
2wd rules!]]></description>
            <dc:creator>RALLYRS</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Sun, 02 Jun 2013 15:00:01 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,76519#msg-76519</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,76519#msg-76519</link>
            <description><![CDATA[ an update would be awesome]]></description>
            <dc:creator>mke723</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Wed, 09 Jan 2013 22:54:24 -0600</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,76503#msg-76503</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,76503#msg-76503</link>
            <description><![CDATA[ Bumpage for updates(hopefully)!]]></description>
            <dc:creator>RALLYRS</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Wed, 09 Jan 2013 20:11:15 -0600</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,71852#msg-71852</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,71852#msg-71852</link>
            <description><![CDATA[ Im still alive I got a bad ulcer caused from a old surgery i puked up over a quart of blood alone.<br />
 by the time it was at is worst i was at a red blood count of 17 thats over 70% low on blood i <br />
was blacking out just standing up and my heart would get too 180 just walking. I did black out<br />
 for a few hrs on the bathroom floor guess there was a chance I could have never woken up :( <br />
<br />
it was nice to see every one at the rally in the pits every one was concerned and asked if i was <br />
ok made me feel better just being there. <br />
<br />
little about the focus its back in the shop and the radiator and all is mounted and its about to start <br />
running soon im not posting anything till its drifting around! <br />
<br />
hear is some fun shit thought im duratec nuts and hears the last thing i picked up for me and my buds <br />
at $200 a motor ;) and theres itbs out for them so if you know any one at Jenve let me know haha!<br />
<br />
Duratec 3.5 v6 they make 265 hp and 250 lbs and that 87 gas. 92 they make little over 300 and <br />
another 60 hp or so with headers and itbs I am in love! yes the 4 banger is little more ideal but for<br />
 how little you have to do to get 300 hp is sweet! around 400 bucks every time you need a fresh motor<br />
 Also they have been making 500 hp with 12 lbs of boost and lasting on the 3.7s There foot print is smaller than the duratec 2.5 no relation.<br />
<img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/2012-09-26_14-46-53_601.jpg" class="bbcode" border="0" /><br />
<img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/2012-09-26_16-22-20_219.jpg" class="bbcode" border="0" /><br />
<br />
these are my subie arms but the ford will have something similar.<br />
<img src="http://i284.photobucket.com/albums/ll25/SteelSolutions/2012-09-27_19-16-37_277.jpg" class="bbcode" border="0" />]]></description>
            <dc:creator>SteelSolutions</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Mon, 01 Oct 2012 18:22:19 -0500</pubDate>
        </item>
        <item>
            <guid>https://www.rallyanarchy.com/phorum/read.php?5,45563,71537#msg-71537</guid>
            <title>Re: RSF2000 Rally Sport Focus! RWD Revolution</title>
            <link>https://www.rallyanarchy.com/phorum/read.php?5,45563,71537#msg-71537</link>
            <description><![CDATA[ Reas something on his facebook page about internal bleeding, like ulcer in stomach. Sounds scary]]></description>
            <dc:creator>john vanlandingham</dc:creator>
            <category>Construction Zone</category>
            <pubDate>Thu, 20 Sep 2012 20:31:38 -0500</pubDate>
        </item>
    </channel>
</rss>
