JVAB Soooper Bitchin Xratty Supra diff kit Here shall be the"Oafish-al List" for the JVAB Sooooper Bitchin Supra Diff kit. I'll cut and past the list from Merkursprout and lets do things here. Provisional List ny update on these? Hoped to have the kids car done before he gets home from Afghanistan. 1. Jeff Esteban aka "Esteban" San Diego, CA spoon_gsr (@) yahoo.com 2. Gavin Diamond England UK gavin.diamond@ntlworld.com 3. Tom Rader Fallbrook CA 92028 2barxr@gmail.com 4. Greg Leach "xr85" dayton,oh 45432 dubeedoo6969@yahoo.com 5. James Davison aka 86MerkurXr4ti Airdrie, Alberta Canada T4A 0B5 jamesrdavison@hotmail.com 6. Anthony Acevedo aka Xrsenix Dover, Delaware 19904 Senixr4ti@aol.com 7. Jim Gilbert aka Got2bquick 2 kits Salisbury NC Jim@powerhouserods.com 8. Nicholas Kroll aka m7stic Midland, MI krollnm@gmail.com 9. Chris Barr aka Turbo-4 1 kit Lebanon, PA Glenn88tc@comcast.net 10. Jahlive12 Milwaukee WI jahlive12@yahoo.com 11. Tomi Hulkkonen Windsor, Ontario, Canada (shipping to Redford, Mi) tomihulkkonen at yahoo dot ca 12. Tim Spencer aka timbo Sneads Ferry, NC timmilus84 at yahoo.com https://www.rallyanarchy.com/phorum/read.php?7,89866,89866#msg-89866 Fri, 26 Jun 2026 14:42:46 -0500 Phorum 5.2.15a https://www.rallyanarchy.com/phorum/read.php?7,89866,97369#msg-97369 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,97369#msg-97369 ossie cossie Buy, Sell & Trade Fri, 16 May 2014 05:58:30 -0500 https://www.rallyanarchy.com/phorum/read.php?7,89866,97352#msg-97352 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,97352#msg-97352
Quote
ossie cossie
Hi i am new to the site, i have an escort rally car and I am from Australia, how much are these kits for the supra diff to ford beam. Thanks Tony.

There were USD345. Post to Oz would be about 55 bucks I think.]]> john vanlandingham Buy, Sell & Trade Thu, 15 May 2014 09:52:28 -0500 https://www.rallyanarchy.com/phorum/read.php?7,89866,97027#msg-97027 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,97027#msg-97027 ossie cossie Buy, Sell & Trade Tue, 06 May 2014 07:14:00 -0500 https://www.rallyanarchy.com/phorum/read.php?7,89866,96482#msg-96482 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,96482#msg-96482
Quote
jbass
Really? Wow- I can't believe I didn't notice that on the other one. DERP :S

Derpty-derp-a-loo.
Bell is packed and heading to UPS, gotta send AJ with the Audi 3 more XR strut mounts.]]> john vanlandingham Buy, Sell & Trade Mon, 14 Apr 2014 16:44:06 -0500 https://www.rallyanarchy.com/phorum/read.php?7,89866,96477#msg-96477 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,96477#msg-96477 jbass Buy, Sell & Trade Mon, 14 Apr 2014 14:44:58 -0500 https://www.rallyanarchy.com/phorum/read.php?7,89866,96476#msg-96476 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,96476#msg-96476
Quote
jbass
John, can you tell me to what dimension that case cover bolt hole boss needs to be milled? My other one is not readily available to check, and I want to get kit #2 installed in car #2 this weekend. :bounce:

same level as the other side OK?]]> john vanlandingham Buy, Sell & Trade Mon, 14 Apr 2014 14:30:32 -0500 https://www.rallyanarchy.com/phorum/read.php?7,89866,96475#msg-96475 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,96475#msg-96475 jbass Buy, Sell & Trade Mon, 14 Apr 2014 11:13:07 -0500 https://www.rallyanarchy.com/phorum/read.php?7,89866,92631#msg-92631 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92631#msg-92631

]]> espacef1fan Buy, Sell & Trade Thu, 19 Dec 2013 04:45:36 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,92630#msg-92630 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92630#msg-92630

http://i205.photobucket.com/albums/bb300/espacef1fan/XR4ti/20131218_200128_zpse15d51be.jpg



]]> espacef1fan Buy, Sell & Trade Thu, 19 Dec 2013 04:42:54 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,92629#msg-92629 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92629#msg-92629
Anyways I am about to post pics of what I did in regards to installing the diff.]]> espacef1fan Buy, Sell & Trade Thu, 19 Dec 2013 04:37:34 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,92599#msg-92599 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92599#msg-92599 espacef1fan Buy, Sell & Trade Wed, 18 Dec 2013 12:30:05 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,92570#msg-92570 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92570#msg-92570
Quote
espacef1fan
I got my kit in this last round John. My concern with not having a weld-sert(weldable insert) is crushing the formed sheetmetal "beam" that is tack welded to the floor of the car that the stock thingy bolts to. That would be assuming I put a bolt in the trunk and a nut under the car or vice versa.

If thats a non issue then I will just drill and use some bolts.

If its a dangerous issue by only using the stock points and crushing is an issue what I will likely do is just find some thick wall tubing and use them as an insert to slide over the bolts and use as a anti crush setup.


I'm not trying to cause issues or anything just trying to solve issues percieved or otherwise in the field in a timely matter. This car will drive by Friday morning!!!!!!!


huh?]]> john vanlandingham Buy, Sell & Trade Tue, 17 Dec 2013 19:28:38 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,92565#msg-92565 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92565#msg-92565
If thats a non issue then I will just drill and use some bolts.

If its a dangerous issue by only using the stock points and crushing is an issue what I will likely do is just find some thick wall tubing and use them as an insert to slide over the bolts and use as a anti crush setup.


I'm not trying to cause issues or anything just trying to solve issues percieved or otherwise in the field in a timely matter. This car will drive by Friday morning!!!!!!!]]> espacef1fan Buy, Sell & Trade Tue, 17 Dec 2013 17:08:22 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,92562#msg-92562 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92562#msg-92562
Quote
espacef1fan
Ok so I didnt get any inserts to weld into my floorpan for the diff-body bracket. Any harm in just running the stock mounting hardware and calling it good?

Access..

I did make the width to make it more stable..
When did you get your kit?
Not in this last round, no?

What is I's sent youse the right thing?]]> john vanlandingham Buy, Sell & Trade Tue, 17 Dec 2013 16:47:17 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,92558#msg-92558 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92558#msg-92558 espacef1fan Buy, Sell & Trade Tue, 17 Dec 2013 13:57:19 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,92330#msg-92330 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,92330#msg-92330 espacef1fan Buy, Sell & Trade Tue, 10 Dec 2013 20:22:12 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91853#msg-91853 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91853#msg-91853
This way I can firm up some things like giving you my address, and how much I am paying for what ;)]]> espacef1fan Buy, Sell & Trade Sat, 23 Nov 2013 20:49:20 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91850#msg-91850 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91850#msg-91850
Quote
NoCoast
Quote
john vanlandingham
Good news!
I asked once again---about the 6th time----at Tacoma Screw wherre I buy hardware and this time they actually walked and looked and found M10 x 1.25 nuts with 14mm hex for the Toyota CV flange nuts so I cleaned them out. Got 42 so thats 3 full sets...and a few extree.

Now maybe its smartest I send them with like Adam's diff covers or the Flanges that some youse galoots need.
We gotta get this figured out so I don't spend hours searching just for miserable little nuts.

Didya get a part number? There's a metric supply place here in Denver. Why the 14m hex?

There's a shoulder on the adaptor pretty close by, we have to be able to put a wrench or socket on the nuts. Usually a wrench or socket is the best way to tighten nuts. YRMV

The CV adaptor was done with the OEM Stupra nuts in hand cause I pulled the diffs myself and I always save all hardware I can.]]> john vanlandingham Buy, Sell & Trade Sat, 23 Nov 2013 14:12:07 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91849#msg-91849 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91849#msg-91849
Quote
NoCoast
http://dixied.com/store/product7143.html

http://www.clipsandfasteners.com/Hex_Flange_Nut_M10_1_25_Thread_19mm_Flange_O_D_p/a18253.htm

No room for flange so this is the one here:
Quote

M10-1.25 J.I.S. Small Hex Nuts Zinc





Bookmark and Share
Online Price: $3.49

Availability: Usually Ships in 3 to 5 Business Days
PRODUCT CODE: A14797

Qty:



Description



J.I.S. Small Hex Nuts
Zinc Plated
J.I.S. B1181
I.S.O. Class 8
Heat Treated
Thread Size & Pitch: 10mm-1.25
Hex Width: 14mm
15 Per Package
View Catalog Page

21.2 cents each]]> john vanlandingham Buy, Sell & Trade Sat, 23 Nov 2013 14:08:21 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91845#msg-91845 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91845#msg-91845 http://dixied.com/store/product7143.html

http://www.clipsandfasteners.com/Hex_Flange_Nut_M10_1_25_Thread_19mm_Flange_O_D_p/a18253.htm]]> NoCoast Buy, Sell & Trade Sat, 23 Nov 2013 10:57:21 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91844#msg-91844 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91844#msg-91844


and a picture of the part number I got when I ordered this box of 50.

]]> timbo Buy, Sell & Trade Sat, 23 Nov 2013 10:37:22 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91843#msg-91843 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91843#msg-91843
Quote
john vanlandingham
Good news!
I asked once again---about the 6th time----at Tacoma Screw wherre I buy hardware and this time they actually walked and looked and found M10 x 1.25 nuts with 14mm hex for the Toyota CV flange nuts so I cleaned them out. Got 42 so thats 3 full sets...and a few extree.

Now maybe its smartest I send them with like Adam's diff covers or the Flanges that some youse galoots need.
We gotta get this figured out so I don't spend hours searching just for miserable little nuts.

Didya get a part number? There's a metric supply place here in Denver. Why the 14m hex?]]> NoCoast Buy, Sell & Trade Sat, 23 Nov 2013 09:32:47 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91836#msg-91836 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91836#msg-91836
The other two guys are now so absorbed in some track stuff they are working on (google wolf racing) that they haven't even driven their XR's this entire year. I will ask them though before I head out your way. I wont be acting on behalf of them however anymore as this is how it seems to end up.
ttyl, Tomi]]> TomiHulk Buy, Sell & Trade Fri, 22 Nov 2013 20:54:44 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91835#msg-91835 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91835#msg-91835
Quote
TomiHulk
Hey John, I know that I am now being a pain in the A$$, but could you hook me up with a 1310 U joint diff flange and a set of the CV shaft nuts? No need to ship as I plan to be there Dec 10, +-3 days...when I know for sure I will call you. This time I am going to drop in, kick parts/tires and chew the fat...Might even be heading to Beijing for a few days through Seattle.
FYI, roundtrip with Delta SeaTac to PEK(Beijing) is $660 right now! Insane cheap...
Let me know if you want anything from Kanuckistan.
Tomi

Naw man only thing I'm worried about is I made like 18 hats for disc brake deals cause you said you and 2 other wanted front kits...and i order calipers too...
I'll get some stuff and set it aside so then you'll have to stop in..

Watcha got going in Beijing? You know what? They NEED some strong unions in the PRC now, gonna organise?


As for what I NEED from Canada, I need 2-3 Institutional size--bigger than fambly sized---bottles of HP Sauce...

it's one of the few things that substantially cheaper there....poooooor me!!!]]> john vanlandingham Buy, Sell & Trade Fri, 22 Nov 2013 20:45:04 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91833#msg-91833 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91833#msg-91833 FYI, roundtrip with Delta SeaTac to PEK(Beijing) is $660 right now! Insane cheap...
Let me know if you want anything from Kanuckistan.
Tomi]]> TomiHulk Buy, Sell & Trade Fri, 22 Nov 2013 19:50:55 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91822#msg-91822 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91822#msg-91822 I asked once again---about the 6th time----at Tacoma Screw wherre I buy hardware and this time they actually walked and looked and found M10 x 1.25 nuts with 14mm hex for the Toyota CV flange nuts so I cleaned them out. Got 42 so thats 3 full sets...and a few extree.

Now maybe its smartest I send them with like Adam's diff covers or the Flanges that some youse galoots need.
We gotta get this figured out so I don't spend hours searching just for miserable little nuts.]]> john vanlandingham Buy, Sell & Trade Fri, 22 Nov 2013 18:03:29 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91797#msg-91797 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91797#msg-91797
Quote
Michaelb
I have a few different driveshafts, what would you need to know the ID of the tube?

-Mike

yeah, I do too but been too busy to dig one out and hacksaw it in half and clean the burrs and measure ID, OD, and wall. If you cut by the weld then its ready for the weld yoke to get welded in..

Post what you see.]]> john vanlandingham Buy, Sell & Trade Fri, 22 Nov 2013 11:59:49 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91791#msg-91791 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91791#msg-91791
-Mike]]> Michaelb Buy, Sell & Trade Fri, 22 Nov 2013 10:18:27 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91772#msg-91772 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91772#msg-91772
Quote
espacef1fan
So its too late to srnd monry for cv and ds hardware? Can anyonr just share the the thread sizes and bokt lengths so I can just order stuff?

Well, the guy sent the box to one of my old SD addresses, so it got sent back to him (thank God it's not lost). He'll resend it. I should have another set of DS hardware. I am positive I have the CV hardware. Once I get it I will make a post.]]> timbo Buy, Sell & Trade Thu, 21 Nov 2013 20:42:17 -0600 https://www.rallyanarchy.com/phorum/read.php?7,89866,91759#msg-91759 Re: JVAB Soooper Bitchin Xratty Supra diff kit https://www.rallyanarchy.com/phorum/read.php?7,89866,91759#msg-91759 espacef1fan Buy, Sell & Trade Thu, 21 Nov 2013 13:03:14 -0600