I had a bitch of a time pulling the transmission out of my EGT, i hind site i may have saved some frustration (not time) by pulling the whole lump out of the car.

Quote
Tim Taylor
Jay, I have a good factory BPT flywheel sitting here. It already has the back rim machined off so it will bolt right on. You're welcome to borrow it for the rally or just get me another one to replace it.

-Tim

Might be good to know why the former teeth are former teeth.

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

I went through my build thread. We had to put a sleeve on that end of the crank and had a machine shop mill out the pocket. How much you wanna bet they got that bit wrong? We're gonna trim the sleeve if at all possible (seems like if it was, we'd have done it that way in the first place but who knows) and hopefully sin no more. When's the next one, Oly? I am so so so so so there....

---

Jay Woodward
Snohomish, WA
'90 Mazdog Frankenprotege
Chronologically, 46...

Quote
Jay
I went through my build thread. We had to put a sleeve on that end of the crank and had a machine shop mill out the pocket. How much you wanna bet they got that bit wrong? We're gonna trim the sleeve if at all possible (seems like if it was, we'd have done it that way in the first place but who knows) and hopefully sin no more. When's the next one, Oly? I am so so so so so there....

Huh?

Wha?

Come on Jay think who you're talking to.
Put up piccies...

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

Har. I'll prolly put up piccies when we get in there and see what went wrong...hain't got any of that area on me at the moment!
EZ sleeve on crankshft, to make rear mainseal, you know, seal, cuz it didn't wanna the first goround... just one of many reasons I intend to drive that car like I hate it...

---

Jay Woodward
Snohomish, WA
'90 Mazdog Frankenprotege
Chronologically, 46...

So...

Seems the orange volvo is back together and ready to go. Its a bit last minute and wackyness will be involved, but any codrivers out there interested?

Al, Ida taken you up if you were up for a newbie. You get the book yet. Hadn't beard.

I'll be there as a volunteer. Didn't think I was gonna make it this year. Had a lot of fun the last time I went, hoping to again. I hope it's not as hot this time though.

Quote
aj_johnson
Al, Ida taken you up if you were up for a newbie. You get the book yet. Hadn't beard.

Its not like I'm some pro. If you can keep us from getting lost on transit, thats all I need. Haint seen the book yet.

We're in it to win it.
cranerallycrew.com

---

"I put the hurt on dirt" - adam crane
http://CraneRallyCrew.com
corolla gt-s "Patches"
Op: S.S.

transit is very simple! AJ should know the area as well. Im rather excited for this event.

---

First Rally: 2010 First RallyX: 2004 (a bunch)
Driver (0), Co-Driver (7)
Organizer (3), Volunteer (3)
Cars Built (2.5), Engines Blown (2) Cages Built (0) # of rotations (3.5)
Last Updated, Apr 9, 2023

I have gear I could loan to any Al Kun co-driver. I could drop it with Crane to be brought out to Idaho

hmm. We just looked at the car with it idling, and the wobble I wa seeing was just where the ring gear teeth are more eroded (however the FUCK that heppened) on one side than the other. Looking at the body of teh flywheel, i can't see the slightest motion. We even put a timing light on it and it shows rock steady. So.... we have a flywheel with damaged teeth, a starter making banging noises when you fire it up, but I think we're only risking not being able to start it if the starter dies, I don't think we're risking having the flywheel come off at 7 grand. Now, I pretty much figure it has to be outta balance, what with there being tooh material missing in an uneven fashiion but is that enough to not run it?

---

Jay Woodward
Snohomish, WA
'90 Mazdog Frankenprotege
Chronologically, 46...

Quote
phlat65
I have gear I could loan to any Al Kun co-driver. I could drop it with Crane to be brought out to Idaho

Hmmmmmmmmmmmmmm

Hummmmmmmmmmmmmmmmmmm..Let me think.

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

Quote
alkun

Quote
aj_johnson
Al, Ida taken you up if you were up for a newbie. You get the book yet. Hadn't beard.

Its not like I'm some pro. If you can keep us from getting lost on transit, thats all I need. Haint seen the book yet.

I'd love the opportunity, but I'm already committed to crewing for a couple of teams. Plus I have no gear. One week earlier and we'd be in business.