Peltor PL6U-66 (cell phone cable)

I am looking for a wiring diagram for the peltor cell phone connector cable, no luck on the internets so I am wondering if anyone here has one I can see? The Peltor part number is PL6U-66. Its basically a Ta5f connector and some sort of 1/8th inch plug I think with 4 rings.

Thanks,
Chris

You could buy one... seems cheap enough to me.
http://www.zerodegreec.ca/phone-adapter.html

But, here's the info you need.

The big Peltor Thread:
http://www.specialstage.com/forums/showthread.php?44266-Peltor-Intercom-meta-thread

Info about TA5f plug:
http://rallynotes.com/2013/04/peltor-fmt120-to-kenwood-ham-radio/

Hope this helps.

Thanks John,
Yeah I thought about buying one but I don't think the cable will be long enough. Looks to be about 3'. My intercom is above our heads towards rear view mirror. I'd like to run the cable up and over to come out close to co driver. I saw that peltor link but it doesn't tell me what pins on the ta5f go to the 1/8" plug. Might just have to spend the 50 and find an ext. cable.
Thanks again!
Chris

Read this:
http://www.epanorama.net/newepa/2014/09/15/android-device-external-mic-wiring/

The 4-pin cellphone plug has the pinout diagram.

You can also buy a 4-pin extension cable on flea-bay or Amazon for a couple of bucks.



Edited 1 time(s). Last edit at 08/05/2015 11:58AM by johnhuebbe.

Contact Bryan at 0degreec@telus.net. He can make it to what ever length you want.

Bryan makes the cables on his website (the zerodegreec.ca) to order so I'm sure he could make it longer if you need longer.

---

Grant Hughes

Quote
johnhuebbe
Read this:
http://www.epanorama.net/newepa/2014/09/15/android-device-external-mic-wiring/

The 4-pin cellphone plug has the pinout diagram.

You can also buy a 4-pin extension cable on flea-bay or Amazon for a couple of bucks.

Hey John, didya notice you have a PM waiting?

there's some questions in it I'd like to know...

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

Thanks you guys for the help!

Thanks for the "plugs" guys....
All puns aside, its appreciated.

I am only making the 3' phone cables now since its a major pain in the ass terminating 4cond cable to 3.5mm 4pin connectors and make them durable. I resorted to ordering a box full of 90deg formed (made to order) cables. I terminate the cables when ordered with the XLR connectors.

I am now making most of my cables with injection molding, so they are super bomb proof now. Thats been exciting to setup. Making molds for over molding cables was a new challenge.

---

Intercom and electronics dude. www.zerodegreec.ca