Stitch welding 1991 Honda crx before or after cage?

cage in cage out , i take it this is all after you have checked the chassis dimensions and had it on a frame machine.

even under normal driving a chassis will get a bit tweaked

---

I would rather drive a slow car fast as a fast car slow!
first rule of cars: get what makes you happy, your the one paying for it!

Quote
tdrrally
cage in cage out , i take it this is all after you have checked the chassis dimensions and had it on a frame machine.

even under normal driving a chassis will get a bit tweaked

No set back, twist or "tweakage" according to service manual measurement specs. Will measure after stitching and caging as well.

---

All bridges burnt, island life is beauty

Hey liq nitrogen in my town is required to buy your own transport container which is 700 bones (5l tank), as well my kid brother and wife had thier first child so uncle duties were required. Wire wheel, map gas and a flat of beer it is then. Bubble bubble boiling trouble.

---

All bridges burnt, island life is beauty

Quote
Snidewhips
Hey liq nitrogen in my town is required to buy your own transport container which is 700 bones (5l tank), as well my kid brother and wife had thier first child so uncle duties were required. Wire wheel, map gas and a flat of beer it is then. Bubble bubble boiling trouble.

No can't be that silly
Welding supply places deliver 750 liter "Dewar flasks" and then pick 'em up when you're done. 1 flask would do 2 Hondas.
Do you buy welding supplies someplace?

Go in there and ask them, don't call, go in. Low pressure LN...costs here around $175... You might have to have an account with them...that was 5 minutes here.

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

Instead of calling lll deal with em via email so I can post the price, apparently because of shipping requirements it must be transferred in an approved container. Praxair and oxypro out two local major suppliers both gave me this info. BUT when the lady told me they can do a 1500 liter drop off I shit a lil bit thinking that was over kill and didn't get a price. A redo is in order I guess. Ill check with my shops supplier of welding trinkets and see if they are more friendly as I did Id myself as a privateer.
I'm surprised there's no how to's on YouTube on this yet. My generation X chromosome likes to see stuff done before I go burning money on stuff. I guess I could open a back alley wart removal clinic to recoup my costs. Ill put a shingle up on kijiji and see if there's any takers.
Thanks john

---

All bridges burnt, island life is beauty

Quote
Snidewhips
Instead of calling lll deal with em via email so I can post the price, apparently because of shipping requirements it must be transferred in an approved container. Praxair and oxypro out two local major suppliers both gave me this info. BUT when the lady told me they can do a 1500 liter drop off I shit a lil bit thinking that was over kill and didn't get a price. A redo is in order I guess. Ill check with my shops supplier of welding trinkets and see if they are more friendly as I did Id myself as a privateer.
I'm surprised there's no how to's on YouTube on this yet. My generation X chromosome likes to see stuff done before I go burning money on stuff. I guess I could open a back alley wart removal clinic to recoup my costs. Ill put a shingle up on kijiji and see if there's any takers.
Thanks john

First that last bit there about wart clinic is exactly why I said GO IN and talk to the MEN--adults --guys who work, not faggots in some cubicle answering email who got a directive--WARNING STONEWALL PEOPLE ABOUT LIQUID NITROGEN because some assholes red-necks somewhere were burning warts off..
I got that ON THE PHONE here from the local Airgas joint when I came back from Boston where I first invented "The Death Ray"--at least for Americas.
There it was "SOoooooo , whatdday doin', huh?" I went in with a friend who had a local account for over 20 years..."Freezing undercoating off, huh? That's different, OK whadday need?"

Hereit was "No we don't do that. uh uh. Nienta, non, nein nienta, nyet! La! La! La! I can hear you!!!!" assholes.

Went in. same like Boston bvut I asked "Wot da fock was that BS on da phone?" The ADULT MEN said "Oh there was some BS from someplace about some methheads burning warts off so they got a memo to ...blah blah"

There are always serious reasons why I say things..So go ahead send your email...we know how well that gets things done with out of the ordinary routine things.

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

Listen to John. Emails are a click to delete and people never have to make an attempt to listen. Copy part of this thread if need be and take it with you, talk to a growd up and then see what happens.

Copy that, face to face it is

---

All bridges burnt, island life is beauty

if you want ill split on the cost of it wif ya, I got an account at a welding shop tooooo

---

what could go wrong?



Edited 1 time(s). Last edit at 09/19/2013 03:06PM by pist'n broke.

Quote
pist'n broke
if you want ill split on the cost of it wif ya, I got an account at a welding shop tooooo

Kevin that stuff cooks off pretty quick but but ya know what? You could help fab the Death Ray Gun... Just a 2 foot hunk of black iron pipe threaded on one end and smahed flattish on the other with some adaptor to the hose with is some corragated shine something--that doesn't turn into glass when running the nitrogen thru it..I've gotten mine by asking at the welding place for old lengths--it does eventually crack so clean the thing, wrap the best quality Duct tape round it several times and figure out the whacked fitting--Liquid Nitrogen here has some odd-ball threads on the tank end

Oh the pipe wants some kind of stand off grips, I used a sheet of POS perforated sheet we had laying in the corner and hammered that around a pipe and brazed a few places to make a tube. zapped that on using some ends

The thing in the end is like a reversed glass pack---outside is perforated, and the tube thru the middle is pipe.

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

kool, im home this Monday, ill whip one up

---

what could go wrong?

Quote
pist'n broke
kool, im home this Monday, ill whip one up

Well find out what the fitting on both ends of the funny hose is... It'll scre onto the tank on one end but you have to gave some means of attaching the Death Ray Gun to the hose..

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

Kev if you fab the "death ray" ill def split the cost within reason of course.
Thanks for the info on fabbing the death ray John although if I could've got the
Cool stuff I would've had no clue fab was required by previous explanations.
Woulda been one of those funny ten years later things..

---

All bridges burnt, island life is beauty

Hey Jeremy,

got the death ray almost done last time I was home, will finish it over thanksgiving, ran out of argon for the welder...

---

what could go wrong?

If you need a bottle I can snag one. Did you ever figure the threads out for the container end?? I suppose I could see if I can get the inside scoop on that to be of some help

---

All bridges burnt, island life is beauty