Buy, Sell & Trade
Don\
Welcome! Log In Register

Advanced

1986 Merkur XR4Ti Rolling Shell with Cage

Posted by Scott Manley 
Scott Manley
Scott Manley
Super Moderator
Location: Spokompton, WA
Join Date: 01/03/2006
Age: Possibly Wise
Posts: 226

Rally Car:
XR4Ti


1986 Merkur XR4Ti Rolling Shell with Cage
September 01, 2019 01:33PM
Up for sale is my XR rally project. I've owned this car since 2001, life and job changes kept putting it on hold. Originally intended to compete in Group 5. Cage was built to specs for 04' and the shell is stitch welded from the front strut towers to the rear strut towers, it will need some additional tubing installed to bring it up to current spec. This just the rolling shell only (has stock suspension and steering) no engine or transmission. Only the rear hatch has glass. Bumpers and covers included, no side arches or body cladding. This vehicle has a clean title, not salvage.

I am only available on the weekends to show car.

86' wide tunnel shell stitch welded from front strut towers to rear strut towers
Welded-in cage, installed by JVAB in Seattle
No engine or transmission
Original rear diff installed
Some of the parts included with the car:
- Toyota 8" LSD differential
- A couple of Turbos, .63 A/R Turbine and another .42
- Cossie intercooler
- A spare fender and A-pillar
- Stock gas tank
- Several sets of front and rear lights
- Misc other parts
- Saab 9000 15" wheels

Asking $600.00


I am only available on the weekends to show car.



Scott Manley
Spokane, WA
86' XR4Ti
37
Please Login or Register to post a reply
Attachments:
open | download - IMG_20180520_192619510.jpg (53.3 KB)
IMG_20180520_192619510.jpg
open | download - IMG_20180520_192628109.jpg (56.7 KB)
IMG_20180520_192628109.jpg
open | download - IMG_20180520_192900925.jpg (40.5 KB)
IMG_20180520_192900925.jpg
Vincent Gagnon
The same thing that I just wrote
Mod Moderator
Location: Golden, BC
Join Date: 03/12/2016
Age: Settling Down
Posts: 157

Rally Car:
Volvo 240



Re: 1986 Merkur XR4Ti Rolling Shell with Cage
September 01, 2019 10:36PM
Hi, there.

I will be visiting John in october, would you be willing to sell the differential and or the turbos separately?

This is a good deal but I'm deep into the Volvo world.

Cheers.



Ask for work.
If they don't give you work, ask for bread.
If they do not give you work or bread, then take bread.

- Emma Goldman
Please Login or Register to post a reply
Scott Manley
Scott Manley
Super Moderator
Location: Spokompton, WA
Join Date: 01/03/2006
Age: Possibly Wise
Posts: 226

Rally Car:
XR4Ti


Re: 1986 Merkur XR4Ti Rolling Shell with Cage
September 04, 2019 12:07PM
Hi Vincent - I would, however the car and the parts are in Spokane (other side of the state). I may be able to bring them over to Seattle. When in October are you here?



Scott Manley
Spokane, WA
86' XR4Ti
37
Please Login or Register to post a reply
Vincent Gagnon
The same thing that I just wrote
Mod Moderator
Location: Golden, BC
Join Date: 03/12/2016
Age: Settling Down
Posts: 157

Rally Car:
Volvo 240



Re: 1986 Merkur XR4Ti Rolling Shell with Cage
September 05, 2019 10:20AM
Quote
Scott Manley
Hi Vincent - I would, however the car and the parts are in Spokane (other side of the state). I may be able to bring them over to Seattle. When in October are you here?

It will be around mid-october ish, I will let you know.

I don't know why I assumed you were in Seattle.

I let you know when I know when I'm going to be there.

Good luck with the sale.



Ask for work.
If they don't give you work, ask for bread.
If they do not give you work or bread, then take bread.

- Emma Goldman
Please Login or Register to post a reply
Scott Manley
Scott Manley
Super Moderator
Location: Spokompton, WA
Join Date: 01/03/2006
Age: Possibly Wise
Posts: 226

Rally Car:
XR4Ti


Re: 1986 Merkur XR4Ti Rolling Shell with Cage
September 16, 2019 12:05PM
***Sold***



Scott Manley
Spokane, WA
86' XR4Ti
37
Please Login or Register to post a reply
Sorry, only registered users may post in this forum.

Click here to login