Construction Zone
Don\
Welcome! Log In Register

Advanced

020 outputs flanges

Posted by William Marenich 
William Marenich
William Marenich
Ultra Moderator
Location: Auburn, MI
Join Date: 01/26/2006
Age: Settling Down
Posts: 42

Rally Car:
91' VW Golf GTI


020 outputs flanges
June 10, 2015 07:18PM
I'm putting my 020 trans back together with a gripper and the new ring and pinion. Can someone tell me I i need to keep the loaded springs on the 90mm flanges? They are impossible to get back on!
Please Login or Register to post a reply
ElectroTech
Steve Wheeler
Mod Moderator
Location: Fork Lake, Alberta
Join Date: 06/09/2015
Age: Settling Down
Posts: 312

Rally Car:
1992 Golf


Re: 020 outputs flanges
June 11, 2015 01:06AM
Technically no, it was put in to reduce the clinking noise of loose flanges floating around. They are a bitch. Couple of things it could be 1) the Gripper diff is thicker causing coil bind in which case it would be near impossible or 2) someone previously installed a heavy spring kit (80% etc) and it's got a ton of preload or coil bind. Are you using a compression bolt and h-beam?
I would take this opportunity to go to 100mm flanges if this is the later 90mm setup.



Power means nothing if you cannot control it!
Please Login or Register to post a reply
Sorry, only registered users may post in this forum.

Click here to login