errrr yeah. whatever busy at work. Point was grabe teh NA fuel pump. Should be the same as the A4's IIRC



Edited 2 time(s). Last edit at 01/30/2012 11:15AM by aj_johnson.

Quote
aj_johnson
Eh... I'd grab the pumps off a non turbo car. Not sure about the 10v turbos, but the 10v NA cars had fuel pumps with a bit more oomph than the 20vturbo cars.

69436 is the bosch part number *I believe.

Found in the 80 and 90 quattros not sure about the 5k's

Someone ran one to 475 whp on a 2.2ltr 20v before he noticed dropoff in pressure. My daily car is running 18 psi on 300cc injectors with no fuel supply issues

Gawwwd damn, I knew I shouldda checked da mobile interwebzzzzzzzzzz moar today....

Stuck my head under two Audi 5k's and some crazy kinda quattro from the early 90's....which were all K-yetzzzzzzz.....no turbos tho.


Damn, if there's a JY pump that'll work.....

Well, that'd just be the biznesssssssss

Audi called it CIS not K-jet, but same idea. and those 5k's may or may not share the same pump. I personally have very little experience with 5k's other than stealing the turbo motors.

Myles and John should join forces to write the most incomprehensible book ever.

---

First Rally: 2010 First RallyX: 2004 (a bunch)
Driver (0), Co-Driver (7)
Organizer (3), Volunteer (3)
Cars Built (2.5), Engines Blown (2) Cages Built (0) # of rotations (3.5)
Last Updated, Apr 9, 2023

Quote
Gravity Fed
Myles and John should join forces to write the most incomprehensible book ever.

Funny thing is he's 35 years younger, different "cultcha" but we understand each other fine... we can both be blabbering this whacked lingo, and then shift to clear analytical talk, then shift back, no problemo muchachito..

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

BTW, pump should be under the car on the drivers side roughly under the rear seat. Sits right next to a big bosch fuel filter. Grab two pumps if they have them, for the most part they either work or they dont.

Quote

Myles and John should join forces to write the most incomprehensible book ever.

It would be like hitchhikers guide to the galaxy written by snoop dog and portland hipster. LOL

Quote
aj_johnson

It would be like hitchhikers guide to the galaxy written by snoop dog and portland hipster. LOL

Quote
Mylesofsmyles

Quote
aj_johnson

It would be like hitchhikers guide to the galaxy written by snoop dog and portland hipster. LOL

Where's the smokey-juana similie?

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

Throw away your cigarettes and light up a spliff

Quote
Mylesofsmyles
Throw away your cigarettes and light up a spliff

Dooooood, when Eye do big rasta-man type hits on me ciggies and you'll get all high---ish.. jesst watchin

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

Its like a train wreck. I want to not look, but I just have too.

yo so ur not gonna believzzzzzzzzzzz diss...

I was like at the yarrrd n saaw me a Krazeeeeeee fuel inyektion pump setup outta a Benz...

I dunno what benz, cuz I found it, hiddin in a ferocious British Feline, go figure!!

It was two pumps, with the prettiest hard lines in the world.....man those Germans do go All OUt!!!

Anyways, the last three numbers in the Bosch PN# was 950.....looks like a 130LPH pump....

Was the 044 spec'd as OEM on any cars???????????

14mm inlet, mang howz many times I gotta sayz zit?

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

mo fukka, what u say bout zitzzzz....

i'm a lil wayzzz from puberty, ya kno!

14mm on the hardware???? Like it takes a 14mm box wrench to get the fawwwkin banjo out????


Or the hose is 14mm......nahhhh, that can't be right.....

But those LPH gotsta mean sumptin, no?

Quote
Mylesofsmyles
mo fukka, what u say bout zitzzzz....

i'm a lil wayzzz from puberty, ya kno!

14mm on the hardware???? Like it takes a 14mm box wrench to get the fawwwkin banjo out????


Or the hose is 14mm......nahhhh, that can't be right.....

But those LPH gotsta mean sumptin, no?

14mm threads as in m14 X 1.5 OR IF ITS HOSE, 14 on the connection..

LPH means LPH, the hint is when they know its a pump that'll be demanding volume in heaps, better make the connection large enough

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.