Cage Gussets 1.5in x 90deg 16Ga CRS

I've got a box of 10 roll cage gussets with some light surface rust on the inside.



I'll let them go for $10each plus shipping in small quantities but I'll ship them for free to anywhere in North America if you take the whole box. They're all made from 16Ga cold roll steel and while they're made for 90 degree joints you can easily cheat them +/-10degrees without any trimming or grinding.

-Tim

Tim,
At least they're not green..

I'll take them all if still available. Do you have PayPal or want a check ( Nigerian Bank) .

Gene

heymagic Wrote:
-------------------------------------------------------
> Tim,
> At least they're not green..


Only because I haven't sent a can of Grabber Green, but I'm going to...

And as of last night I have a buncha All-Trac Toiletta trannies we picked up for Tim.

Tell me Gene, remembering that dis guy painting some of my beautiful 50mm struts some disgusting babyshit brown, what color do you think Tims trannies will be whenever he sees them?
Lessee, Toiletta All-crap.....


>
> I'll take them all if still available. Do you have
> PayPal or want a check ( Nigerian Bank) .
>
> Gene

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

You're nuttin but a rattle can bully John...

I had someone offer to buy them all last night but he hasn't come through with sending the money yet. I'll give him until tonight and then they're yours Gene.

As for you John...we both know you're far to lazy to drive all the way to Redmond just to put ugly paint on a transmission that I'm going to take apart to prototype a limited slip diff. Knock yourself out though.

-Tim

Tim Taylor Wrote:
-------------------------------------------------------
> I had someone offer to buy them all last night but
> he hasn't come through with sending the money yet.
> I'll give him until tonight and then they're
> yours Gene.
>
> As for you John...we both know you're far to lazy
> to drive all the way to Redmond just to put ugly
> paint on a transmission that I'm going to take
> apart to prototype a limited slip diff. Knock
> yourself out though.
>


Muwhah hahha ha!
> -Tim

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

I would prefer that you refer to the color as "Speed Beige" or "Marin Racing Ecru" in all future references

Al was the one that painted them anyway...

Tim Taylor Wrote:
-------------------------------------------------------
> I would prefer that you refer to the color as
> "Speed Beige" or "Marin Racing Ecru" in all future
> references

Oh OK.
And for the record the trannies will be variously finished in Cascade Foothills Infantine Ejecta
>
> Al was the one that painted them anyway...

WHAT!!???

Ooooooh dear, the plop thickens.

---

John Vanlandingham
Sleezattle, WA, USA

Vive le Prole-le-ralliat

www.rallyrace.net/jvab
CALL +1 206 431-9696
Remember! Pacific Standard Time
is 3 hours behind Eastern Standard Time.

john vanlandingham Wrote:
-------------------------------------------------------
> Tim Taylor Wrote:
> --------------------------------------------------
> -----
> > I would prefer that you refer to the color
> as
> > "Speed Beige" or "Marin Racing Ecru" in all
> future
> > references
>
> Oh OK.
> And for the record the trannies will be variously
> finished in Cascade Foothills Infantine Ejecta
> >
> > Al was the one that painted them anyway...
>
> WHAT!!???
>
> Ooooooh dear, the plop thickens.
>
>
>
>
> John Vanlandingham
> Sleezattle, WA, USA
>
> Vive le Prole-le-ralliat
>
> www.jvab.f4.ca

Is that a DuPont or PPG color ??

yeah, just wait till you guys see the sweet "competition brown" driving suit I am going to have custom made...

SOLD

Where did you buy those originally?

I know I could make some, but those looked pretty nice and it would just save a bunch of time to buy some.

Thanks,

Kevin Wesley

---

Thanks,

Kevin Wesley

Tim made those.
If you search on here there's a thread that has templates for the sheet metal to make them as well as pretty good instructions. There's also an ad I posted on specialstage that lists what I'm willing to make for people.
I think he sold a bunch to a shop so he might be able to direct you to where to buy more.

---

Grant Hughes

I make those every few months in 100 piece lots for some college friends who do rock-crawling stuff. You can get them retail here:

http://www.polyperformance.com/shop/Dimpled-Gusset-p-2878.html

I couldn't sell that box of 10 because they had surface rust. If anyone wants wholesale quantities let me know and we can work out a deal...if you only want a couple of them order from polyperformance.

-Tim